Installation Sheet

2
SAVE THESE INSTRUCTIONS!
SUPPORT POST
THREADED
WASHER
Screw the support posts to the threaded washers.
#6-32
SET SCREW
Push the standoff rod all the way into the support post
and tighten the #6-32 set screw with 1/16 Allen wrench.
1/16 ALLEN WRENCH
STANDOFF ROD
SUPPORT
POST
#6-32
SET SCREW
1/16 ALLEN
WRENCH
STANDOFF ROD
SUPPORT
POST
Push the housing nipple all the way onto the standoff
rod and tighten the #6-32 set screw snugly with the
1/16 Allen wrench.
Repeat steps 8 and 9 for remaining standoffs.
Place the MonoRail into the housing.
Loosen the #6-32 set screw on the housing nipple so
that it can turn easily and screw the housing nipple to
the housing tight.
Tighten the #6-32 set screw with the 1/16 Allen wrench.
#6-32 SET SCREW
1/16 ALLEN
WRENCH
HOUSING
HOUSING
NIPPLE
MONORAIL
1D
1E
1F
1G
7
8
9
7
8
10
9
11
12
13
11
13
12
7400 Linder Ave, Skokie, IL 60077
847.410.4400
www.techlighting.com
© 2008 Tech Lighting, L.L.C. All rights reserved. The "Tech Lighting" graphic is
a registered trademark of Tech Lighting, L.L.C. Tech Lighting reserves the right
to change specifications for product improvements without notification.
A Generation Brands Company