Installation Guide

3
Replacing the Lamp
Lift the glass shade up to expose the socket.
GLASS SHADE
SOCKET
Remove the lamp shield and the old lamp.
BI-PIN LAMP
LAMP SHIELD
CAUTION: To reduce the risk of a burn or electric
shock during relamping, disconnect the power to
the fixture.
NOTE: Use only your fingers and a soft cloth to
replace the lamp.
Use 35 Watt, Bi-Pin Halogen Lamp.MAX
Handle the new replacement lamp with a soft cloth to
prevent the natural oils on the fingertips from collecting
on the lamp. This will help extend the life of the lamp.
Gently insert the new lamp into the socket.
Push the lamp shield onto the spring clip.
Lower the glass shade onto the socket assembly.
2A
2B
2C
2D
1
1
2
2
3
4
5
6
4
5
6