Installation Sheet

3
Installing the Outer Glass & Lamp
Lift the glass shade up to expose the socket.
Remove the lamp shield and the old lamp.
BI PIN LAMP-
LAMP SHIELD
Gently insert the new lamp into the socket.
THUMB
SCREW
NYLON WASHER
INNER GLASS
OUTER GLASS
STUD
Line up the outer glass holes with the inner glass studs
and secure the outer glass to inner glass with provided
thumb screws and nylon washers.
2A
1
2
1
1
GLASS SHADE
SOCKET
2B
2
3
3
4
2C
2D
4
For incandescent versions, use 50MAX
Watt Bi-Pin Halogen Lamp.
For versions, use providedLED LEDMAX 8 Watt
Bi-Pin Lamp.
CAUTION: To reduce the risk of a burn or electric
shock during relamping, disconnect the power to
the fixture.
NOTE: lamp shield is for halogen lamping option only.
NOTE: Use only your fingers and a soft cloth to
replace the lamp.