Installation Sheet

2
1A
Install the Fixture
1
Unscrew the collar nut from the screw collar on the mounting plate. Remove the mounting plate and driver from the canopy.
Install the mounting plate to the electrical box with the #8-32 screws provided.
Secure the mounting plate with the long screws and washers. CAUTION: Long screws must be screwed into a solid structure
capable of supporting 100 lbs.
Feed the fixture wires through the gasket, plate and cover, then place them on the fixture nipple. NOTE: Do not secure plate
with Allen screws at this time.
2
3
4
LONG SCREW
(SEE CAUTION
STEP 3)
WASHER
#8-32 SCREW
MOUNTING
PLATE
JUNCTION BOX
2
3
2
ALLEN SCREW
(SEE NOTE STEP 4)
COVER
PLATE
GASKET
FIXTURE NIPPLE
MOUNTING PLATE
DRIVER
1
4
CANOPY
COLLAR NUT
SCREW COLLAR
FIXTURE