Installation Sheet

1B
Determine the desired height of the fixture using the provided stems and assemble them by screwing them together.
Feed the fixture wires through the stem assembly, then screw the stem assembly onto the stem.
Feed the fixture wires through the collar nut and canopy, then slide them onto the stem assembly.
Feed the fixture wires through half ball and screw it onto the top of the stem assembly.
Slide the half ball into the screw collar on the mounting plate ensuring that it properly drops to the bottom of the collar.
Place the driver in the mounting plate brackets.
5
6
7
8
HALF BALL
STEM
COLLAR NUT
9
CANOPY
10
DRIVER
SCREW COLLAR
HALF BALL
BRACKET
6
9
10
5
5
5
8
5
3