Installation Sheet

Carefully place the power line/cord inside the fixture,
install the fixture onto the base plate, and secure it in
place by tightening down the set screws.
5
3D
ALLEN
WRENCH
5
SET SCREW
3
5
4B
4
3
Loosen (do not remove) the set screw on the fixture arm
using the provided Allen Wrench.
Aim the head to the desired direction and secure in
place by re-tightening the set screw. Tick marksNote:
are in intervals of 10°. Indicator is positioned to 40° in
the image above.
SET SCREW
ALLEN
WRENCH
FIXTURE ARM
INDICATOR
HEAD
4
4A
2
1
Loosen (do not remove) the three set screws on the
stem using the provided Allen Wrench.
Rotate the fixture arm to the desired direction and
secure in place by re-tightening the set screws.
SET SCREW
ALLEN
WRENCH
FIXTURE ARM
Adjust the Fixture
STEM
5A
1
Install or Replace Optics
OPTIC
OPTIC HOLDER
HEAD
Unscrew and remove the optic holder.
Remove old optic and replace with new one.
Screw the optic holder back into the head until fully
secured.
2
3