Installation Sheet

2B
Bring the power wires to the fixture location in
accordance with local electrical codes.
Connect the white fixture wire to one of the low-
voltage power line wires with the provided outdoor
waterproof wire nut.
Connect the black fixture wire to the remaining low-
voltage power line with the provided outdoor
waterproof wire nut.
3
5
4
2C
6
Stake the fixture to the desired location and properly
bury the wire and wire nut connections.
5
4
3
3A
Install the Fixture using a Stake
(without canopy)
Remove the four set screws with the allen wrench.
Remove the bushing and set aside.
Remove the canopy and discard.
5
4
3
3B
Feed the fixture wire through the bushing
Reinstall the bushing using the four set screws and allen
wrench.
4
3
ALLEN WRENCH
SET SCREW
BUSHING
CANOPY
3C
Remove and discard the bolt from the stake.
3
STAKE
STAKE BOLT
2