Installation Sheet

2
Line up an anchor with the center of a mounting plate
hole and push the anchor in up to the threads.
Screw the anchor the rest of the way in with a
screwdriver.
1D
4
5
Secure the mounting plate to the anchor with a #8
screw and washer.
Repeat steps 4-6 for the remaining anchors.
1E
6
7
MOUNTING PLATE
ANCHOR
MOUNTING PLATE
#8 SCREW
WASHER
4
6
6
6
6
4 4 4
2A
HANG STRAIGHT
STEM
FIXTURE
SET SCREW
Loosen the set screw on the hang straight using the
provided Allen wrench.
Determine desired length of fixture using the provided
stems and assemble them by screwing them together.
Feed the fixture wires through the stem assembly and
screw it to the fixture.
Feed the fixture wires through the hang straight and
screw it onto the stem assembly.
Re-tighten the set screw on the hang straight.
ALLEN
WRENCH
3
2
2
4
FIXTURE WIRES
3
1
2
4
5
NOTE: Complete the next steps for each section of
the chandelier.
Assemble the Fixture