Installation Sheet

3
3A
Leave 12" of the cord behind the canopy for power
connections. Cut the excess cord.
Strip the end of the wires.
12"
Install the Fixture
MOUNTING
PLATE
ELECTRICAL BOX
3
4
5
Connect the ground wire to a suitable ground in
accordance with local electrical codes.
Connect the white wires to the neutral power wire with
a wire nut.
Connect the black wires to the hot power wire with a
wire nut.
Neatly place all wires and wire nut connections in the
canopy and reinstall the canopy to the mounting plate
(reversal of step 1A).
3B
1
2
3
4
5
6
CANOPY
Install the Pendants
4A
4B
Slide the end cap over the fixture cord making sure the
threading faces upward.
1
Loosen ( ) the set screw in the straindo not remove
relief.
Slide the strain relief over the fixture cord and position
it near the end of the cord.
Tighten the set screw in the strain relief to hold it in
place.
2
3
4
END CAP
FIXTURE CORD
STRAIN RELIEF
SET SCREW
FIXTURE CORD
1
2
3