Installation Sheet

7400 Linder Ave, Skokie, IL 60077

847.410.4400

www.techlighting.com

a registered trademark of Tech Lighting, L.L.C. Tech Lighting reserves the right

to change specifications for product improvements without notification.

A Generation Brands Company

SAVE THESE INSTRUCTIONS!

Start with one of the large glass panels and secure one

side of it by using a provided thumb screw. (Do Not

Over-Tighten Thumb Screws.)

Have an assistant continue to support other end of the

glass by hand.

While continuing to support the first glass panel take

one of the small glass panels and lay it over the large

piece and align the holes.

Secure both pieces in place by using a provided thumb

screw.

Support the other side of the small glass panel as done

for the large panel in step 2.

Take a large panel and slide it under the small panel

installed in the last step, align the mounting holes and

secure in place with a provided thumb screw.

Continue this process until you have install all glass

panels.

NOTE: The first thumb screw will have to be

removed and reinstalled at the end of this process

NOTE: It is recommended that two people

complete the following steps to ensure the glass

is installed safely.

Install Glass Panels