Installation Sheet

DANGER

The complete fixture exceeds 75 lbs., it must be

supported independently of the outlet box unless the

outlet box is listed for the weight to be supported.

Installation Instructions for

920BAU18

Bau 18 Pendant

PENDANTS

1.0

700BAU18

1.0

CAUTION RISK OF FIRE-

This product must be installed in accordance with the

applicable installation code by a person familiar with

the construction and operation of the product and the

hazards involved.

Use minimum 90°C supply conductors.

GP I :ENERAL RODUCT NFORMATION

This product is suitable for indoor locations.

This product can be dimmed with a standard electronic

dimmer.

This instruction shows a typical installation.

SAVE THESE INSTRUCTIONS!

Tech Lighting reserves the right to change specifications for product improvements without notification.

7400 Linder Ave., Skokie, IL 60077

T 847.410.4400 | F 847.410.4500

www.techlighting.com

PAGE 1
920BAU18 Installation Instructions for Bau 18 Pendant 700BAU18 1.0 CAUTION - RISK OF FIRE PENDANTS This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. Use minimum 90°C supply conductors. GENERAL PRODUCT INFORMATION: This product is suitable for indoor locations. This product can be dimmed with a standard electronic dimmer. This instruction shows a typical installation.
PAGE 2
Install the Fixture 1A N H 2 N CANOPY H COLLAR NUT HALF BALL/ UPPER STEM MOUNTING PLATE #8-32 SCREW LAG SCREW 3 DRIVER STEM ASSEMBLY 4 7 3 8 CANOPY 5 FIXTURE FIXTURE 1 2 3 4 5 6 7 8 9 10 11 12 Remove the mounting plate and driver from the canopy. Secure the mounting plate to the junction box with the provided #8-32 screws. DANGER: If the junction box is not rated for 75 lbs. or more, the mounting plate must be supported independently of the junction box.