Installation Sheet

Installation Instructions for
700TDCDAP_
1
920TDCODA
PENDANTS
Coda Pendant
Assemble the Fixture
1.0
1A
1
2
Feed the fixture cord completely through the shade
and gently lower the shade onto the LED assembly.
Adjust the shade until it is level on the LED assembly.
SHADE
LED ASSEMBLY
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing
NEC compliant junction boxes.
This product is suitable for damp locations.
This product may be dimmed using a low-voltage electronic
dimmer.
This instruction shows a typical installation.
CORD
7400 Linder Ave, Skokie, 60077IL
847.410.4400
www.techlighting.com
© 2017 Tech Lighting, L.L.C. All rights reserved. The "Tech Lighting" graphic is
a registered trademark of Tech Lighting, L.L.C. Tech Lighting reserves the right
to change specifications for product improvements without notification.
A Generation Brands Company
SAVE THESE INSTRUCTIONS!