Installation Guide

Installation Instructions for

GENERAL PRODUCT INFORMATION:

This product is suitable for damp locations.

This product can be dimmed with a standard incandescent

dimmer.

Echo Grande

Installing the Outer Glass & Lamp

CAUTION: To reduce the risk of a burn or electric

shock during relamping, disconnect the power to

the fixture.

Screw the lamp into the socket.

Use Volt, type A19

medium base lamp.

MAX 75 Watt120

PENDANTS - LINE VOLTAGE

1.0

700TDECGP_

920TDECGP

Line up the outer glass holes with the inner glass studs

and secure the outer glass to inner glass with provided

thumb screws and nylon washers.

THUMB

SCREW

NYLON WASHER

INNER GLASS

OUTER GLASS

STUD

LAMP

SOCKET

PAGE 1
920TDECGP Installation Instructions for Echo Grande 700TDECGP_ PENDANTS - LINE VOLTAGE GENERAL PRODUCT INFORMATION: This product is suitable for damp locations. This product can be dimmed with a standard incandescent dimmer. Installing the Outer Glass & Lamp C AUTION: To reduce the risk of a burn or electric shock during relamping, disconnect the power to the fixture.
PAGE 2
SAVE THESE INSTRUCTIONS! 7400 Linder Ave, Skokie, IL 60077 847.410.4400 www.techlighting.com © 2008 Tech Lighting, L.L.C. All rights reserved. The "Tech Lighting" graphic is a registered trademark of Tech Lighting, L.L.C. Tech Lighting reserves the right to change specifications for product improvements without notification.