Installation Sheet

2.3

Installation Instructions for

700T_ _ECP

920TDECSP

GP I :ENERAL RODUCT NFORMATION

This product is suitable for damp locations.

This product can be dimmed with a LED or TRIAC dimmer.

Consult lamp manufacturer for additional information.

Echo Large Pendant

Installing the Outer Glass & Lamp

CAUTION: To reduce the risk of a burn or electric

shock during relamping, disconnect the power to

the fixture.

Line up the outer glass holes with the inner glass studs

and secure the outer glass to inner glass with provided

thumb screws and nylon washers.

THUMB

SCREW

NYLON WASHER

INNER GLASS

OUTER GLASS

STUD

LAMP

Screw the lamp into the socket.

SOCKET

Refer to fixture marking for lamp information.

PENDANTS

PAGE 1
920TDECSP Installation Instructions for Echo Large Pendant 700T_ECP_ PENDANTS GENERAL PRODUCT INFORMATION: This product is suitable for damp locations. This product can be dimmed with a LED or TRIAC dimmer. Consult lamp manufacturer for additional information. Installing the Outer Glass & Lamp CAUTION: To reduce the risk of a burn or electric shock during relamping, disconnect the power to the fixture.
PAGE 2
SAVE THESE INSTRUCTIONS! 7400 Linder Ave, Skokie, IL 60077 847.410.4400 www.techlighting.com © 2017 Tech Lighting, L.L.C. All rights reserved. The "Tech Lighting" graphic is a registered trademark of Tech Lighting, L.L.C. Tech Lighting reserves the right to change specifications for product improvements without notification.