Installation Guide

Installation Instructions for
700TDFIRGP_
1
920TDFIREP
PENDANTS
GENERAL PRODUCT INFORMATION:
This product is suitable for damp locations.
This product can be dimmed with a standard incandescent
dimmer.
thousand
degrees
2
TM
Fire Grande
Assemble the Fixture
CAUTION: To reduce the risk of a burn or electric
shock during relamping, disconnect the power to
the fixture.
Feed the cable through the top of the outer shade and
shade cap.
Mount the fixture to the ceiling by following the
instructions provided with the canopy.
Push the lamp base completely into the socket.
1.0
1A
2A
1
1
CABLE
OUTER SHADE
SHADE CAP
2
Install the Lamp
Use 120 Volt, Type T4,
G9 Base, Bi-Pin Halogen Lamp.
MAX 60 Watt
SOCKET
LAMP
INNER SHADE
1
1