Installation Sheet

Installation Instructions for

700 _TDHARP

920TDHARPR

PENDANTS

GP I :ENERAL RODUCT NFORMATION

This product is suitable for damp locations.

This product can be dimmed with a standard incandescent

dimmer.

Harper Pendant

1.2

CAUTION: To reduce the risk of a burn or electric

shock during re-lamping, disconnect the power to

the fixture.

Use S-21 Squirrel CageMAX 60 Watt

type A19 medium base lamps

or other style type A1960 Watt

medium base lamps.

SOCKET

LAMP

Assemble the Fixture

Screw the lamp into the socket.

SHADE

SOCKET

ASSEMBLY

METAL

WASHER

Install the silicone washer, metal washer, and silicone

washer (in that order) on top of the socket assembly

and feed the fixture cord completely through the

shade.

Adjust the shade until it is level on the socket

assembly.

SILICONE

WASHERS

PAGE 1
920TDHARPR Installation Instructions for Harper Pendant 700TDHARP_ 1.2 PENDANTS GENERAL PRODUCT INFORMATION: This product is suitable for damp locations. This product can be dimmed with a standard incandescent dimmer. 1B Assemble the Fixture 1A 1B 1B 1 METAL WASHER 1 SILICONE WASHERS SOCKET 3 SOCKET ASSEMBLY LAMP SHADE C AUTION: To reduce the risk of a burn or electric shock during re-lamping, disconnect the power to the fixture.
PAGE 2
SAVE THESE INSTRUCTIONS! 7400 Linder Ave, Skokie, IL 60077 847.410.4400 www.techlighting.com © 2015 Tech Lighting, L.L.C. All rights reserved. The "Tech Lighting" graphic is a registered trademark of Tech Lighting, L.L.C. Tech Lighting reserves the right to change specifications for product improvements without notification.