Installation Guide

1.3

Installation Instructions for

700T_HUDP_

920TDHUDP

PENDANTS

GENERAL PRODUCT INFORMATION:

This product is suitable for damp locations.

This product can be dimmed with a standard incandescent

dimmer.

t h o u s a n d

d e g r e e s

Hudson Pendant

Installing the Lamp

CAUTION: To reduce the risk of a burn or electric

shock during relamping, disconnect the power to

the fixture.

Use MAX 120 Volt, 75 Watt A19

(medium) base lamp.

From bottom of the glass opening screw the lamp

completely into the socket.

SOCKET

LAMP

GLASS SHADE

PAGE 1
920TDHUDP Installation Instructions for Hudson Pendant 2 dt he og u r s ea en ds 700T_HUDP_ TM PENDANTS GENERAL PRODUCT INFORMATION: This product is suitable for damp locations. This product can be dimmed with a standard incandescent dimmer. Installing the Lamp 1A CAUTION: To reduce the risk of a burn or electric shock during relamping, disconnect the power to the fixture. Use MAX 120 Volt, 75 Watt A19 (medium) base lamp.
PAGE 2
SAVE THESE INSTRUCTIONS! 2 dt he og u r s ea en ds TM 7400 Linder Ave, Skokie, IL 60077 847.410.4400 www.2thousanddegrees.com © 2008 Tech Lighting, L.L.C. All rights reserved. The "2thousand degrees" graphic is a registered trademark of 2thousand degrees. 2thousand degrees reserves the right to change specifications for product improvements without notification.