Installation Sheet

Adjust the fixture height (from bottom of the fixture
shade to top of the canopy) by moving the canopy
and strain reliefs up or down.
When the desired height is achieved, tighten the set
screw on the strain relief and secondary strain relief.
3
1C
1
CORD
CANOPY
2
3
3
4
Mount the mounting plate to the electrical box with
the two provided #8-32 screws.
1
2A
Install the Canopy
MOUNTING
PLATE
#8-32
SCREW
1
1
1A
Remove the set screws from the canopy, then remove
the mounting plate.
1
2
1B
Feed the cord through the strain relief, canopy and
secondary strain relief.
STRAIN
RELIEF
CANOPY
CORD
SECONDARY
STRAIN RELIEF
Adjust the pendant