Installation Sheet

Installation Instructions for

700 _TDKRMPL

920TDCKARAML

PENDANTS

GP I :ENERAL RODUCT NFORMATION

This product is suitable for damp locations.

I a LED or TRIAC dimmer.this product can be dimmed with

Consult lamp manufacturer for additional information.

Karam Large Pendant

CAUTION: To reduce the risk of a burn or electric

shock during relamping, disconnect the power to

the fixture.

Screw the lamp into the socket.

1.1

Refer to fixture marking for lamp information.

LAMP

SOCKET

Insert the socket assembly into the shade, feed the cord

and the aircraft cables out through the top.

Feed the cord and the aircraft cables through the top

cover and gently rest it on the shade.

SHADE

TOP COVER

SOCKET

ASSEMBLY

CORD

AIRCRAFT CABLE

Assemble the Shade

Install/Replace the Lamp

PAGE 1
920TDCKARAML Installation Instructions for Karam Large Pendant 700TDKRMPL_ 1.1 PENDANTS GENERAL PRODUCT INFORMATION: This product is suitable for damp locations. Ithis product can be dimmed with a LED or TRIAC dimmer. Consult lamp manufacturer for additional information. Install/Replace the Lamp Assemble the Shade 1A 2A CORD TOP COVER AIRCRAFT CABLE SOCKET LAMP SHADE SOCKET ASSEMBLY C AUTION: To reduce the risk of a burn or electric shock during relamping, disconnect the power to the fixture.
PAGE 2
SAVE THESE INSTRUCTIONS! 7400 Linder Ave, Skokie, IL 60077 847.410.4400 www.techlighting.com © 2017 Tech Lighting, L.L.C. All rights reserved. The "Tech Lighting" graphic is a registered trademark of Tech Lighting, L.L.C. Tech Lighting reserves the right to change specifications for product improvements without notification.