Installation Sheet

3
Install the Pendant
1
Secure the mounting plate to the electrical box with the
two #8-32 screws provided.
3A
#8-32 SCREW
MOUNTING
PLATE
2
3
4
Connect the blue driver wire to the insulated pendant
wire with the white tracer.
Connect the red driver wire to the other insulated
pendant wire.
Connect the fixture to a suitable ground in accordance
with local electrical codes.
Connect the black driver wire to the hot power line wire
with a wire nut.
Connect the white driver wire to the neutral power line
wire with a wire nut.
3B
DRIVER
5
6
3
4
5
6
2
4
3C
Properly place the driver, all wires, and wire nut
connections inside the canopy.
Align the canopy holes with the mounting plate holes
and secure the canopy in place by reinstalling and
tightening the two canopy screws.
CANOPY SCREW
7
8
8 8