Manualshelf

Canopy Installation

ManualsBrandsTech Lighting ManualsLightingMina 11 Light 21-11/16" Wide LED Multi Light Pendant with a Clear Outer and Inner Etched Glass Spheres - 2200K
1234
2
Adjust each fixtures’ height (from bottom of the fixture
shade to top of the canopy) by pulling the fixture cords
through the strain relief.
When the desired look is achieved, tighten the set screw
on each strain relief.
4"
Leave 6" of the cord behind the canopy for power
connections. Cut the excess cord.
From the end of the cord, strip the insulation 4" using a
sharp knife. .Make sure not to nick the inner wires
Strip the end of the wires.
Repeat for all the cords.
STRAIN RELIEF
CORD
SET SCREW
1A2B
3
1A2C
5
6
4
2
7
3
2
Install the Fixture
CANOPY
Feed a fixture cord through each the strain relief.
Note: Taping down the frayed end of the cloth may
assist in feeding it through the strain relief.
CORD
STRAIN RELIEF
STRAIN RELIEF
CORD
1A2A
1