Canopy Installation

1
Installation Instructions for
Line-Voltage Mini Canopy 3 Port
Preparing the Canopy
#8-32
SCREW
CROSSBAR
Mount the crossbar assembly to the electrical box with
the two provided #8-32 screws.
Remove the crossbar from the canopy by completely
unscrewing the decorative bolt.
920TDSOCOCNS
Install the Fixture
CANOPY
Loosen the set screw on each strain(Do Not Remove)
relief.
Feed a fixture cord through each the strain relief.
Note: Taping down the frayed end of the cloth may
assist in feeding it through the strain relief.
DECORATIVE
BOLT
CROSSBAR
CANOPY
1.0
700TDMRD3_
CORD
STRAIN RELIEF
SET SCREW
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing NEC compliant
junction boxes.
This product is suitable for damp locations.
This instruction shows a typical installation.
PENDANTS
1A1A
1
1A1B
2
2 2
1A2A
1
2

Summary of content (4 pages)