Installation Guide

2
SAVE THESE INSTRUCTIONS!
3B
3A
Install the Glass Disk
7400 Linder Ave, Skokie, IL 60077
847.410.4400
www.techlighting.com
© 2008 Tech Lighting, L.L.C. All rights reserved. The "Tech Lighting" graphic is
a registered trademark of Tech Lighting, L.L.C. Tech Lighting reserves the right
to change specifications for product improvements without notification.
A Generation Brands Company
CAP
GLASS DISK
CAP
3
BOTTOM OF THE
FABRIC SHADE
JAM NUT
NIPPLE
BUSHING
Loosen the knurled nut and adjust the nipple height so
the back of the cap is level with bottom of the shade.
Tighten the jam nut firmly against the bushing.
1
2
Remove the cap.
Place the glass disk onto the nipple and secure it against
the shade pegs with the cap.
3
4
NOTE: Do not over tighten the cap. Overtightening
may break the glass and result in injury.
NIPPLE
SHADE
PEG