Installation Guide

1.7

Installation Instructions for

700T_PSP_

920TDPSPN

PENDANTS

GENERAL PRODUCT INFORMATION:

This product is suitable for damp locations.

This product can be dimmed with a standard incandescent

dimmer.

t h o u s a n d

d e g r e e s

Powell Street Pendant

SOCKET

Installing the Lamp

Screw the lamp into the socket.

CAUTION: To reduce the risk of a burn or electric

shock during relamping, disconnect the power to

the fixture.

Use MAX 120 Volt, 150 Watt G40

(medium) base Globe lamp.

LAMP

PAGE 1
920TDPSPN Installation Instructions for Powell Street Pendant 2 dt he og u r s ea en ds 700T_PSP_ TM PENDANTS GENERAL PRODUCT INFORMATION: This product is suitable for damp locations. This product can be dimmed with a standard incandescent dimmer. Installing the Lamp 1A C AUTION: To reduce the risk of a burn or electric shock during relamping, disconnect the power to the fixture. Use MAX 120 Volt, 150 Watt G40 (medium) base Globe lamp. 1 SOCKET 1 LAMP 1 Screw the lamp into the socket. 1.
PAGE 2
SAVE THESE INSTRUCTIONS! 2 dt he og u r s ea en ds TM 7400 Linder Ave, Skokie, IL 60077 847.410.4400 www.2thousanddegrees.com © 2008 Tech Lighting, L.L.C. All rights reserved. The "2thousand degrees" graphic is a registered trademark of 2thousand degrees. 2thousand degrees reserves the right to change specifications for product improvements without notification.