Installation Sheet

PENDANTS

GP I :ENERAL RODUCT NFORMATION

This product is suitable for damp locations.

Installation Instructions for

700TDWDS_

920TDWNDSR

Windsor Pendant

1.1

Install the Shade

Feed the cord and socket assembly through the shade.

SHADE

SOCKET

ASSEMBLY

Install the Lamp

CAUTION: To reduce the risk of a burn or electric

shock during re-lamping, disconnect the power to

the fixture.

LAMP

Slide the shade up to expose the socket.

Screw the lamp into the socket.

Gently slide the shade down back into place.

Refer to fixture marking for lamp information.

SHADE

SOCKET

CORD

PAGE 1
920TDWNDSR Installation Instructions for Windsor Pendant 700TDWDS_ PENDANTS GENERAL PRODUCT INFORMATION: This product is suitable for damp locations. Install the Shade 1A Install the Lamp 2A CORD SHADE SOCKET 1 SHADE LAMP C AUTION: To reduce the risk of a burn or electric shock during re-lamping, disconnect the power to the fixture. SOCKET ASSEMBLY Refer to fixture marking for lamp information. 1 Feed the cord and socket assembly through the shade.
PAGE 2
SAVE THESE INSTRUCTIONS! 7400 Linder Ave, Skokie, IL 60077 847.410.4400 www.techlighting.com © 2016 Tech Lighting, L.L.C. All rights reserved. The "Tech Lighting" graphic is a registered trademark of Tech Lighting, L.L.C. Tech Lighting reserves the right to change specifications for product improvements without notification.