Installation Sheet

3
3C
Neatly place all wires and wire nut connections inside
the canopy.
Align the canopy holes with the mounting plate holes.
Secure the canopy in place by tightening the canopy
screws using the provided Allen Wrench.
7
8
ELECTRICAL BOX
CANOPY
SCREW
ALLEN
WRENCH
1
4A
Install the Lamps and Glass
Install the lamp according to fixture model. For Bi-Pin
lamps, carefully insert the lamp pins into the holes on
the socket. screw the lamp into theFor E12 lamps,
socket. Refer to the label on the socket for Max Wattage
Information.
Install the glass shades by carefully screwing them onto
the threads on the sockets. Make sure the glass shade
is installed correctly before releasing. Do not over-
tighten.
CAUTION: To reduce the risk of a burn or electric
shock during re-lamping, disconnect the power to
the fixture.
Refer to fixture marking for lamp information.
2
SOCKET
LAMP
()see step 1
1
2
GLASS SHADE