Installation Sheet

4
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, 60077IL
847.410.4400
www.techlighting.com
© 2018 Tech Lighting, L.L.C. All rights reserved. The "Tech Lighting" graphic is
a registered trademark of Tech Lighting, L.L.C. Tech Lighting reserves the right
to change specifications for product improvements without notification.
A Generation Brands Company
Replace the Lamps
1
Remove the glass shade by unscrewing it from the
socket. it is recommendedFor the two bottom shades,
to rotate the glass shade towards the center of the
fixture as it is being removed.
Remove the old lamp and replace with new one. See
Section 4A Step 1 for details.
Re-install the glass shade accordingly. Make sure the
glass shade is installed correctly before releasing. Do
not over-tighten.
If re-lamping the bottom arms is proving difficult, try
installing the lamp and the shade simultaneously.
Repeat steps 1-4 as necessary.
2
3
5
5A
BASE
LAMP
GLASS SHADE
BOTTOM ARM
4
4
GLASS SHADE
LAMP
GLASS SHADE