Installation Sheet

2
1D
9
8
Properly place all wires and wire nut connections into
the electrical box.
Hook the top of the fixture to the top of the mounting
plate and swing the bottom of the fixture toward the
plate until it is flush with the wall.
Tighten the set screw at the bottom of the fixture.
10
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, 60077IL
847.410.4400
www.techlighting.com
© 2017 Tech Lighting, L.L.C. All rights reserved. The "Tech Lighting" graphic is
a registered trademark of Tech Lighting, L.L.C. Tech Lighting reserves the right
to change specifications for product improvements without notification.
A Generation Brands Company
ALLEN WRENCH
SET SCREW
10
1C
4
5
6
Connect the ground wire to a suitable ground in
accordance with local electrical codes.
Connect the white driver wire to the neutral power line
with a wire nut.
Connect the black driver wire to the hot power line with
a wire nut.
Place the driver and all wire nut connections neatly into
the junction box.
4
5
6
1E
For wet locations, caulk around the base with
waterproof construction sealant.
11
DRIVER
7