Installation Guide

2
Connect the Power
Turn the power to the electrical box off.
Make sure that the backplate is grounded in accordance
with local electrical codes.
Connect the black fixture wires to the hot power line
wire with a wire nut.
Connect the white fixture wires to the neutral power
line wire with a wire nut.
Properly place all wires into the backplate.
2A
#8-32 SCREW
Place the sconce base onto the backplate and align the
holes.
Replace and tighten the #8-32 screws.
2B
1
2
3
4
5
2
3
4
5
6
7
6
7
7