Installation Guide

3
Install the Lamps and Glass Shade
LAMP
CAUTION: To reduce the risk of a burn or electric
shock during relamping, disconnect the power to
the fixture by turning the wall switch off.
Use MAX 120 Volt, 40 Watt Type E11
Base Mini Candelabra Halogen Lamp.
NOTE: Use only your fingers and a soft cloth to
replace the lamp.
Screw the lamps into the sockets.
SOCKET
LAMP
SOCKET
3B
BRACKET CHANNEL
GLASS SHADE EDGES
From top of the sconce carefully slide the glass shade
edges into the bracket channels.
3A
1
1
1
2
2