Installation Sheet

2
4
5
Verify that the mounting plate is level before continuing.
Line an anchor tip with the center of an anchor hole,
and push the anchor into the wall up to the threads.
Screw the anchor in the rest of the way with a Phillips-
head screwdriver.
Repeat for the other anchor hole.
6
7
8
Slide a #8 screw through a washer, and screw it into an
anchor to secure the fixture base to the wall. Repeat for
the other anchor.
1C
11
ANCHOR
ANCHOR
7
1D
11
ANCHOR
SCREW
WASHER
ANCHOR
8
10
11
9
1E
Connect the mounting plate ground wire to a suitable
ground according to local electrical codes.
Connect the white fixture wire to the neutral power line
wire with a wire nut.
Connect the black fixture wire to the hot power line
wire with a wire nut.
10
11
9