Installation Sheet

2
Install the Fixture
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
847.410.4400
www.techlighting.com
© 2013 Tech Lighting, L.L.C. All rights reserved. The "Tech Lighting" graphic is
a registered trademark of Tech Lighting, L.L.C. Tech Lighting reserves the right
to change specifications for product improvements without notification.
A Generation Brands Company
Install the Diffuser
2B
3
3
3
3
BRACKET SCREW
DIFFUSER
BRACKET
DIFFUSER
BRACKET
FIXTURE BASE
Secure the diffuser bracket to the fixture base using the
four small provided bracket screws.
3
2A
DIFFUSER
BRACKET
Line up the diffuser holes with the diffuser bracket holes
(diffuser’s textured side out).
Secure the diffuser in place with the two provided
thumb screws. DO NOT OVER TIGHTEN.
1
2
DIFFUSER
THUMB
SCREW
1
2
3
1
Connect the fixture to a suitable ground in accordance
with local electrical codes.
Connect the white fixture wire to the neutral power line
wire with a wire nut.
Connect the black fixture wire to the hot power line
wire with a wire nut.
2
3
4
DRIVER
5
3B
5
Properly place the driver, all wires, and wire nut
connections into the electrical box.
While being mindful of the glass diffuser, hook the top
of the fixture to the top of the mounting plate and
swing the bottom of the fixture toward the plate until it
is flush with the wall.
Tighten the set screw to secure the fixture.
6
3A
6
SET SCREW