Installation Sheet

2
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
847.410.4400
www.techlighting.com
© 2015 Tech Lighting, L.L.C. All rights reserved. The "Tech Lighting" graphic is
a registered trademark of Tech Lighting, L.L.C. Tech Lighting reserves the right
to change specifications for product improvements without notification.
A Generation Brands Company
1C
5
6
Connect the ground wire to a suitable ground in
accordance with local electrical codes.
Connect the white driver wire to the neutral power line
with a wire nut.
Connect the black driver wire to the hot power line with
a wire nut.
Properly place the driver, all wires, and wire nut
connections into the backplate and secure the fixture to
the mounting plate by reinstalling the two fixture
screws (reversal of step 1A).
4
5
6
1D
For wet locations, caulk around the base with
waterproof construction sealant.
8
4
7