Installation Sheet

Connect the mounting plate ground wire to a suitable
ground in accordance with local electrical codes.
Connect the white fixture wire to the neutral power line
wire with a wire nut.
Connect the black fixture wire to the hot power line
wire with a wire nut.
Properly place all wires and wire nut connections into
the electrical box and reinstall the fixture base onto the
mounting plate (reversal of step 1A).
4
2
5
6
7
1C
5
4
1D
8
For wet locations, caulk around the base with
waterproof construction sealant.
6
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, 60077IL
847.410.4400
www.techlighting.com
© 2018 Tech Lighting, L.L.C. All rights reserved. The "Tech Lighting" graphic is
a registered trademark of Tech Lighting, L.L.C. Tech Lighting reserves the right
to change specifications for product improvements without notification.
A Generation Brands Company