Installation Sheet

Remove the fixture screws located on the top and bottom of the fixture base using a screw driver, then remove the
mounting plate from the fixture base.
Connect the fixture to suitable ground in accordance with local electrical codes.
Connect the white driver wire to the neutral power line wire with a wire nut.
Connect the black driver wire to the hot power line wire with a wire nut.
Properly place the driver, all wires, and wire nut connections into the electrical box, then install the mounting plate
onto the electrical box with the two #8-32 screws provided.
Connect the black driver wire to the black fixture wire with a wire nut.
Connect the red driver wire to the red fixture wire with a wire nut.
Mount the fixture back onto the mounting plate and reinstall fixture screws (reversal of step 1).
Install the Fixture
6
7
1
1
2
MOUNTING PLATE
FIXTURE
FIXTURE SCREW
1A
2
3
1
4
5
6
1
2
DRIVER
7
8
3
4