Installation Sheet

1.0

Installation Instructions for

Stratos Wall

700 STR_WS

920WSSTRATW

GP I :ENERAL RODUCT NFORMATION

These fixtures are intended to be installed

utilizing compliant junction boxes.NEC

This product is suitable for damp locations.

This product may be dimmed with a TRIAC, low-voltage

electronic or 0-10V dimmer.

WCALL OLLECTION

Install the Fixture

Remove the two fixture screws from the sides of the

fixture.

Remove the mounting plate from the back of the

fixture.

Attach the mounting plate to the electrical box using

the two provided #8-32 screws.

CAUTION RISK OF FIRE-

This product must be installed in accordance with

the applicable installation code by a person familiar

with the construction and operation of the product

and the hazards involved.

Use minimum 90°c supply conductors.

MOUNTING PLATE

FIXTURE

SCREW

PAGE 1
920WSSTRATW Installation Instructions for Stratos Wall 700WSSTR_ W ALL C OLLECTION GENERAL PRODUCT INFORMATION: These fixtures are intended to be installed utilizing NEC compliant junction boxes. This product is suitable for damp locations. CAUTION - RISK OF FIRE This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
PAGE 2
1C 2A 2B DRIVER SMALL GLASS 5 4 THUMB SCREW 6 LARGE GLASS 7 4 5 3 Overlap a large glass over the small glass installed in step 2A and align the holes with the ones in small glass and the fixture body. Connect the ground wire to a suitable ground in accordance with local electrical codes. 4 Use two of the provided thumb screws to secure the large glass and the small glass to the fixture body. Connect the white driver wire to the neutral power line with a wire nut.