Manualshelf

User Manual

ManualsBrandsTech Lighting ManualsCeiling LightsTiella 800CBL5PN, Accent Electronic Low Volt Surface Track Lighting Kits, 100 Watts Halogen, Nickel
12345678910
BLACK
TRANSFORMER
WIRE
BLACK/HOT POWER
LINE WIRE
– Place the wire nut connections into the electrical box.
Line up the back plate with the two screw holes located
on the electrical box and insert the screws. Tighten the
screws until the back plate is secure.
– Connect the white transformer wire to the white/neutral
power line wire from the electrical box using a wire nut.
– Connect the black transformer wire to the black/hot power
line wire using a wire nut.
– Tuck the wires into the housing and slide the housing
onto the back plate.
– Line up the transformer housing with the three screw
holes on the back plate. Tighten the screws until the
transformer housing is secure.
TRANSFORMER
HOUSING
3