Installation Instructions

2
Install the Fixture
Assemble the Fixture
1
2
3
HANG STRAIGHT
STEM
Determine desired length of fixture using the provided
stems and assemble them by screwing them together.
Feed the fixture wires through the stem assembly and
screw it to the fixture.
Feed the fixture wires through the hang straight and
screw it onto the stem assembly.
2
1
1
3
FIXTURE WIRES
2A
Leave 6" of the wire behind the canopy for power
connections. Cut the excess wire.
Strip the end of the wires.
6"
3A
1
2
FIXTURE
3
4
5
Connect the fixture to a suitable ground in accordance
with local electrical codes.
Connect the white driver wire to the neutral power line
wire with a wire nut.
Connect the black driver wire to the hot power line wire
with a wire nut.
For 0-10V dimming, use the purple and gray wires to
connect to a compatible dimmer.
3B
3
4
5
6
6