Installation Instructions

3
3C
Neatly place all wires and wire nut connections inside
the canopy.
Align the canopy holes with the mounting plate holes.
Secure the canopy in place by tightening the canopy
screws using the provided Allen Wrench.
7
8
ELECTRICAL BOX
CANOPY
SCREW
ALLEN
WRENCH
LED HOUSING
COVER
LENS
OPTIC
4A
Unscrew and remove the housing cover.LED
Remove the optic.
If installing an optional lens, rest the lens inside the
housing cover.
Install the optic (replacement or existing) inside the LED
housing cover.
Screw the housing cover back on.LED
Optics and Lenses
4
5
3
2
1
SAVE THESE INSTRUCTIONS!
All rights reserved.