Installation & Assembly

1.1

Installation Instructions for

Gia Bath

700 _BCGIAR

920BCGIAD

GP I :ENERAL RODUCT NFORMATION

This fixture are intended to be installed utilizing

NEC compliant junction boxes.

Suitable for damp locations.

Install the Fixture

Remove the two fixture screws from the top and base

of the fixture.

Remove the mounting plate from the back of the

fixture.

FIXTURE SCREW

Secure the mounting plate to the electrical box with the

provided #8-32 screws .

#8-32 SCREW

MOUNTING

PLATE

CAUTION RISK OF FIRE-

This product must be installed in accordance with

the applicable installation code by a person familiar

with the construction and operation of the product

and the hazards involved.

Use minimum 90°c supply conductors.

BCATH OLLECTION

MOUNTING

PLATE

PAGE 1
920BCGIAD Installation Instructions for Gia Bath 700BCGIAR_ 1.1 B ATH C OLLECTION GENERAL PRODUCT INFORMATION: CAUTION - RISK OF FIRE This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. This fixture are intended to be installed utilizing NEC compliant junction boxes. Use minimum 90°c supply conductors. Suitable for damp locations.
PAGE 2
1C 1D FIXTURE BASE FIXTURE SCREW 8 DRIVER 5 6 8 4 8 4 Connect the fixture to a suitable ground in accordance with local electrical codes. 5 Connect the white fixture wire to the neutral power line wire with a wire nut. 6 Connect the black fixture wire to the hot power line wire with a wire nut. 7 Properly place the driver, wires, and wire nut connections into the fixture base. Note: For 227V versions, the driver must be installed in the junction box.