Installation & Assembly

4
Connect the fixture to a suitable ground in accordance
with local electrical codes.
Connect the white fixture wire to the neutral power line
wire with a wire nut.
Connect the black fixture wire to the hot power line
wire with a wire nut.
Properly place the driver, wires, and wire nut
connections into the fixture base.
Note: For 227V versions, the driver must be installed in
the junction box.
5
6
7
2
7400 Linder Ave, Skokie, 60077IL
847.410.4400
www.techlighting.com
© 2015 Tech Lighting, L.L.C. All rights reserved. The "Tech Lighting" graphic is
a registered trademark of Tech Lighting, L.L.C. Tech Lighting reserves the right
to change specifications for product improvements without notification.
A Generation Brands Company
1C
DRIVER
4
5
6
FIXTURE BASE
1D
FIXTURE SCREW
8
8
Mount the fixture by sliding it back onto the mounting
plate and reinstalling the two fixture screws (reversal of
figure 1A).
8
SAVE THESE INSTRUCTIONS!