Installation & Assembly

1.0

Installation Instructions for

Ibiss

700_IBIS_

920FJIBISS

H-LVEADS OW OLTAGE

GP I :ENERAL RODUCT NFORMATION

This product is ETL listed and suitable only for indoor dry

locations and approved for use at any height above the

finished floor.

Adjust the head by rotating to desired position. Rotation

capabilities up to 330°.

Adjust the LED module by pivoting to the desired

position. Pivoting capabilities up to 360 .°

NOTE: For double versions, each LED module pivots

independently.

PAGE 1
920FJIBISS Installation Instructions for Ibiss 700_IBIS_ H EADS -L OW V OLTAGE GENERAL PRODUCT INFORMATION: This product is ETL listed and suitable only for indoor dry locations and approved for use at any height above the finished floor. 1A 1 12 1 Adjust the head by rotating to desired position. Rotation capabilities up to 330°. 2 1 Adjust the LED module by pivoting to the desired position. Pivoting capabilities up to 360°. NOTE: For double versions, each LED module pivots independently.
PAGE 2
SAVE THESE INSTRUCTIONS! 7400 Linder Ave, Skokie, IL 60077 847.410.4400 www.techlighting.com © 2011 Tech Lighting, L.L.C. All rights reserved. The "Tech Lighting" graphic is a registered trademark of Tech Lighting, L.L.C. Tech Lighting reserves the right to change specifications for product improvements without notification.