Installation Instructions

With a pencil, mark the location of the 4 anchor screw
holes in the fixture base.
Remove the fixture base from the ceiling. (Reverse of
1B.)
5
1C
5
5
5
5
6
CEILING
Using the mark points that were determined in step 5,
tap the anchor into the ceiling up to the threaded
portion with a hammer.
ANCHOR
CEILING
1D
7
7
1E
Screw the anchor in the rest of the way with a Phillips
screwdriver.
8
8
1B1B1B2A
Prepare the fixture
(3.5” J-Box Screw Spacing)
2
Align the through holes in the fixture base with the #8-
32 screws to junction box.
Lightly tighten the #8-32 screws to hold the fixture base
in place through the next steps.
3
1
2
21
2
With a pencil, mark the location of the 4 anchor screw
holes in the fixture base.
Remove the fixture base from the ceiling. (Reverse of
2A.)
3
2B
3
3
3
3
4
2
Note: Continue to Section 3A to connect the fixture.
ANCHOR
SCREW HOLE
#8-32 SCREW
FIXTURE
BASE
FIXTURE
BASE
32
1
ANCHOR
SCREW HOLE
FIXTURE
BASE