Installation & Assembly

2
1
2
3
Connect the black driver wire to the black fixture wire
with a wire nut.
Connect the red driver wire to the red fixture wire with a
wire nut.
Neatly place the driver and wires inside the canopy.
3A
Install the Fixture
Feed the half ball/upper stem assembly through the top
of the canopy.
Determine the desired height of the fixture using the
provided stems and assemble them by screwing them
together.
Feed the fixture wires through the stem and half ball
assemblies, then screw the stem assembly to the fixture.
Assemble the Fixture
2A
STEM
HALF BALL/
UPPER STEM ASSEMBLY
CANOPY
1
2
3
1
2
2
3
FIXTURE
WIRES
4
5
6
Connect the fixture to a suitable ground in accordance
with local electrical codes.
Connect the white driver wire to the neutral power line
wire with a wire nut.
Connect the black driver wire to the hot power line wire
with a wire nut.
3B
5
6
4
DRIVER
2
1
CANOPY
FIXTURE