Manualshelf

Installation & Assembly

ManualsBrandsTech Lighting ManualsLightingPirlo 1 - Light Single Cone Pendant
12
1A
Install the Fixture
2
1
2
SOCKET
CAUTION: To reduce the risk of a burn or electric shock during re-lamping, disconnect the power to the fixture.
Feed the cord through the shade and lower the shade until it rests properly on the socket.
Install the lamp by inserting into the socket. Refer to the label on the socket for Max Wattage information.
Install the diffuser by placing it over the socket and screwing it onto the fixture. Make sure that the diffuser is properly
installed before releasing. Do not over tighten.
Follow the instructions included with the canopy to complete installation.
CANOPY
MOUNTING PLATE
#8-32 SCREW
DIFFUSER
CORD
SET SCREW
STRAIN RELIEF
3
1
4
3
LAMP