Installation & Assembly

Install or Replace the Lamp
CAUTION: To reduce the risk of a burn or electric
shock during relamping, disconnect the power to
the fixture.
NOTE: lamp shield is for halogen lamping option only.
BI PIN LAMP-
LAMP SHIELD
Remove the lamp shield and the old lamp.
3B
2
2
3A
3
Gently insert the new lamp or LED module into the
socket. Refer to the label on the socket for Max Wattage
3
BI PIN LAMP-
3C
3
NOTE: For halogen versions only, handle the new
replacement lamp with a soft cloth to prevent the
natural oils on the fingertips from collecting on the
lamp. This will help extend the life of the lamp.
Gently lift the shade up to expose the socket.
1
SOCKET
1
LED
MODULE
2A
Install the Inner and Outer Shades
Align the inner and outer shades with the spider ring.
Use the glass supports to secure the shades in place.
1
2
NOTE: If the shade does not slide up easily, loosen the
set screw located on the top of the spider ring.