Installation Instructions

Carefully place the power line/cord inside the fixture,
install the fixture onto the base plate, and secure it in
place by tightening down the set screws.
5
3D
3
4B
4A
Adjust the Fixture
Install or Replace Optics
ALLEN
WRENCH
5
SET SCREW
5
Loosen (do not remove) the three set screws on the
stem using the provided Allen Wrench.
Rotate the fixture arm to the desired direction and
secure in place by re-tightening the set screws.
Loosen (do not remove) the set screw on the fixture arm
using the provided Allen Wrench.
Aim the head to the desired direction and secure in
place by re-tightening the set screw. Tick marksNote:
are in intervals of 10°. Both heads can move
independently.
SET SCREW
ALLEN
WRENCH
FIXTURE ARM
STEM
SET SCREW
ALLEN
WRENCH
FIXTURE ARM
INDICATOR
HEAD
4
3
4
5A
1
OPTIC
OPTIC HOLDER
HEAD
Remove the optic holder by unscrewing the Allen
screw using the provided Allen wrench.
Remove old optic and replace with new one.
Reinstall the optic holder.
2
3
ALLEN WRENCH
ALLEN SCREW
1
2