AL TI -S KI W AT C H 1
Tech4o Alti-Ski Watch™ 1.0 Introduction/Features: • Altimeter w/cumulative assent/descent • Barometer • Temperature • Ski Run Counter • Time / date / alarm Owner's Manual Content: 1.0 1.1 1.2 2.0 2.1 3.0 3.1 4.0 4.1 4.2 5.0 5.1 5.2 6.0 6.1 7.0 7.1 8.0 8.1 8.
TEMPERATURE 1.1 Button Functions On/Off Mode Button: [M] Used to select among the main modes of the watch ALTIMIETER TIME Button: [o/o] Used to confirm selections, start/stop the stopwatch, and lock/unlock altitude Set/+ Button: [s/+] Used to access setting mode and increase/ change digits during setting display.
2.1 Time / Date Mode - Setting 3.0 Daily Alarm Mode - Display • In Time / Date mode press and hold the Set/+ button [s/+] for two seconds. • The 12 H / 24 H will flash. Use the [o/-] button to select between a 12 or 24 hour clock feature. Press the [o/o] button to confirm selection. • The hours will flash. Use the [s/+] and [o/-] buttons to select the correct hour. Press the [o/o] button to confirm selection. • The minutes will flash. Use the [s/+] and [o/-] buttons to select the correct minutes.
Press the [o/-] button to confirm selection and advance to the countdown timer mode. 4.2 Countdown Timer Mode Using the Countdown Timer • When in countdown timer mode, press the [o/o] button to start the countdown. • Press the [o/o] button again to stop the countdown. • Press the [o/o] button again to resume the countdown • When the countdown timer expires the alarm will sound for 30 seconds and the timer will reset to the last countdown timer setting.
• To view the stopwatch, press the [o/-] button three times while in date/time mode. • When the stopwatch is selected, the watch will display StP 1 in the top row and 0:00 in the bottom row. 5.1 Stopwatch Mode - Setting • In stopwatch mode, press and hold the [s/+] button for two seconds. • The LAP/INT indicator will flash. • Both LAP and intermediate settings will record time the same way, but the way the information is displayed will vary.
6.0 Stopwatch History Mode - Display 7.0 Alternate Time Zone Mode - Display When the stopwatch history mode is selected the watch will display St HSt on the top row and the current home time on the bottom row depending on your selection made in temperature mode. • To access the stopwatch history mode, press the [o/-] button 4 times while in time/date mode.
.0 Temperature Mode - Display • To view temperature mode, press the [m] button until the mode indicator displays T. • In temperature mode the watch will display temperatures in the top row and home time, temperature, or run counter in the bottom row. 8.1 Temperature Mode - Setting • In temperature mode, press and hold the [s/+] button for 2 seconds. The ˚F or ˚C indicator will flash. • Press the [o/-] button to select between ˚F or ˚C. • Press the [o/o] button to confirm selection.
.1 Altimeter Mode - Setting 9.3 Altimeter Mode - Barometric Pressure • In altimeter mode, press and hold the [s/+] button for 2 seconds. • The current altitude reading will flash. • Using the [s/+] and [o/-] buttons, enter your reference altitude. Your reference altitude should be obtained from a reliable map source for your current altitude. • Once you have researched and entered your reference altitude, press the [o/o] button to confirm selection. • The ft/m indicator will now flash.
.1 Descent Mode - Trip Descent 10.5 • In descent mode, the default view is the total trip descent view. • To clear/reset the total trip descent, press and hold the [s/+] button for 2 seconds. • In descent mode, press the [o/-] button 4 times to view the total lifetime descent. • To clear/reset the total lifetime descent, press and hold the [s/+] button for 2 seconds. 10.2 Descent Mode - Rate of Descent • In descent mode, press the [o/-] button once to view the current rate of descent.
.2 Ascent Mode - Rate of Ascent 12.0 Run Counter - Display • In ascent mode, press the [o/-] button once to view the current rate of ascent. • To clear/reset the current rate of ascent, press and hold the [s/+] button for 2 seconds. To view the run counter press the [m] button until the mode indicator displays R. • In run counter mode the watch will display run information in the top row and the current home time on the second row. • A run is calculated based on altitude adjustment.
.2 Run Counter - Daily Run Counter • To view daily run counter, press the [o/-] button. The total number of runs for the day will be displayed. • A run is calculated based on altitude adjustment. An additional run is added to the total when a period of descent is followed by an ascent greater than 60ft. or 20m. • The daily run counter is automatically reset at midnight. 12.3 Run Counter - Lifetime Run Counter • To view the lifetime run counter, press the [o/-] button.
www.tech4o.com U.S.A.: Johnson Outdoors Inc. Canada: Johnson Outdoors Canada Inc. 625 Conklin Road, PO Box 966 4180 Harvester Road Burlington, Ontario, Binghamton, NY 13902 Canada L7L 6B6 Phone: 607.779.2222 Phone: 905.634.0023 Toll Free 1.800.572.8822 Toll Free: 1.800.263.6390 Fax: 607.779.2293 Fax: 1.800.661.1170 24 REV. A 10.
