ET ER M AL TI H AT C W
Tech4o Altimeter Watch 1.0 Introduction/Features Owner's Manual Content 1.0 Introduction/Features 1.1 Button Functions 1.2 Major Function Modes 2.1 Time / Date Mode - Setting 3.0 Daily Alarm Mode - Display 3.1 Daily Alarm Mode - Setting 4.0 Countdown Timer Mode Display 4.1 Countdown Timer Mode Setting 4.2 Countdown Timer Mode Using the Countdown Timer 5.0 Stopwatch Mode - Display 5.1 Stopwatch Mode - Setting 5.2 Stopwatch Mode Using the Stopwatch 6.0 Stopwatch History Mode Display 6.1 7.0 7.1 8.0 8.1 8.
1.1 Button Functions 1.2 Major Function Modes Mode Button: [M] Selects among the main modes of the watch. Press any button to wake the watch from sleep mode. Press the [M] button to toggle among the main function mode. Set/+ Button: [s/+] Accesses setting mode and increase/change digits during setting display. Also sets intermediate/lap times in stopwatch mode. On/Off Button: [o/o] Confirms selections, start/stop the stopwatch, and lock/unlock altitude.
2.1 Time / Date Mode - Setting 3.0 Daily Alarm Mode - Display • In Time / Date mode press and hold the Set/+ button [s/+] for two seconds. • The 12 H / 24 H indicator will flash. Press [o/-] button to select between a 12 or 24 hour clock feature. Press the [o/o] button to confirm. • The hours indicator will flash. Press [s/+] and [o/-] buttons to select the correct hour. Press the [o/o] button to confirm. • The minutes indicator will flash. Press [s/+] and [o/-] buttons to select the correct minutes.
4.0 Countdown Timer Mode - Display This watch includes a countdown timer. • To view the countdown timer, press [o/-] button twice while in time/date mode. • When the countdown timer is selected, the watch will display TIMER and the countdown time in the top row and the current time in the bottom row. 4.1 Countdown Timer Mode - Setting • To set the countdown timer, press and hold the [s/+] button for 2 seconds. The hours will flash. • Press [s/+] and [o/-] buttons to adjust the hour.
measuring unit changes to 1 second and the measuring range is 99 hours, 59 minutes, 59 seconds. 5.1 Stopwatch Mode - Setting • In stopwatch mode, press and hold the [s/+] button for two seconds. • The LAP/INT indicator will flash. • Both LAP and intermediate settings will record time the same way, but the way the information is displayed will vary. The LAP setting will show the just the last lap time when the [s/+] or [o/o] buttons are pushed and in the stopwatch history.
proceed to the next available stopwatch to begin recording another set of times following the steps above. [ Note that there are 5 available stopwatches]. More stopwatch information can be recorded by clearing stopwatch data in the stopwatch history mode or by recording over stopwatch #5. 6.0 Stopwatch History Mode - Display The Stopwatch History mode allows you to access and view data at the end of an event. • To access the stopwatch history mode, press the [o/-] button 4 times while in time/ date mode.
the current home time or temperature in the bottom row. For more on interpreting the barometric TREND graph, please refer to section 9: Barometer Mode. 7.1 Alternate Time Zone Mode - Setting • In the alternate time zone mode, press and hold the Set/+ button [s/+] for two seconds. • The hours will flash. Press [s/+] and [o/-] buttons to select the correct hour, making sure to account for a.m. A, or p.m. P. Press the [o/o] button to confirm. • The minutes will flash.
8.2 Altimeter Mode - Reading the Altimeter Data • Current Altitude * Current altitude is the default display in altitude mode. This is the first feature displayed when selecting altitude mode. • Maximum Altitude [1st sub-mode]: * In altitude mode, press the [o/-] button once to view the maximum altitude reached since the maximum altitude reading was last reset. * The word MAX is displayed to the right of the trend graph. * Press and hold the [s/+] button for 2 seconds to reset the maximum altitude.
shows TREND, 24h, 2h, and the current barometric pressure on the top half of the display and the current time on the bottom row. 9.1 Barometer Mode - Setting • In barometer mode, press and hold [s/+] button for 2 seconds. • The current barometric pressure will flash. • We recommend that you do NOT change the sea level pressure SE. • Press the [o/o] button to confirm . • The unit of measure will flash. Press [o/-] button to select between inHg and mbar. Press the [o/o] button to confirm . 9.
• Minimum Daily Barometric Pressure: * This feature displays the minimum barometric pressure for the current day. * This feature will automatically reset at midnight. 10.0 Temperature Mode - Display Temperature mode records and displays critical information about changing temperature conditions. • To view temperature mode, press the [m] button until the mode indicator displays T.
* For more accurate readings, remove the watch from your wrist and allow 5-10 minutes for sensors to adjust. * Press [o/-] to proceed to the 24h Daily Temperature Difference feature. • 24h Daily Temperature Difference: * This feature displays the change in temperature over the last 24 hours. * To reset this feature, press and hold the [s/+] button for 2 seconds. * Press the [o/-] button to advance to the Maximum Daily Temperature feature.
www.tech40.com U.S.A.: Johnson Outdoors Inc. 625 Conklin Road, PO Box 966 Binghamton, NY 13902 Phone: 607.779.2222 Toll Free 1.800.572.8822 Fax: 607.779.2293 Canada: Johnson Outdoors Canada Inc. 4180 Harvester Road Burlington, Ontario, Canada L7L 6B6 Phone: 905.634.0023 Toll Free: 1.800.263.6390 Fax: 1.800.661.1170 24 REV. A 10.
