Installation Manual

162 Using the iDRAC6 Directory Service
addresses of the domain controllers where the iDRAC6 device object
and the Association objects are located.
NOTE: The FQDN or IP address that you specify in the Domain Controller
Server Address field should match the Subject or Subject Alternative Name
field of your domain controller certificate if you have certificate validation
enabled.
15 Click Next . The Active Directory Configuration and Management Step 3
of 4
page is displayed.
16 Under Schema Selection , select Extended Schema.
17 Click Next . The Active Directory Configuration and Management Step 4
of 4
page is displayed .
18 Under Extended Schema Settings , type the iDRAC Name and iDRAC
Domain Name
to configure the iDRAC device object. The iDRAC
domain name is the Domain in which iDRAC Object is created.
19 Click Finish to save Active Directory Extended Schema settings.
The iDRAC6 Web server automatically returns you to the
Active
Directory Configuration and Management
page.
20 Click Test Settings to check the Active Directory Extended Schema settings.
21 Type your Active Directory user name and password.
The test results and the test log are displayed. For additional information,
see "Testing Your Configurations" on page 175.
NOTE: You must have a DNS server configured properly on iDRAC to support
Active Directory login. Click iDRAC Settings  Network/Security  Network
page to configure DNS server(s) manually or use DHCP to get DNS server(s).
You have completed the Active Directory configuration with Extended Schema.